Close

Presentation

2nd CAD for Hardware Security Workshop (CAD4Sec 2023)
DescriptionSecurity vulnerabilities in hardware designs may turn out to be catastrophic as it is almost impossible to patch them once the hardware design has been manufactured. The emerging and ever-increasing security vulnerabilities in modern/complex hardware designs have been studied in recent years, e.g., side-channel leakage, information leakage, access control violations, and malicious functionality. These attacks can virtually circumvent the security mechanisms built at pre-silicon and put the chips/systems at risk. Ensuring the security of hardware designs is challenging due to their huge complexity, aggressive time-to-markets, limited security-oriented knowledge of designers, high-recurring cost of maintaining large teams/devices, the difficulty of establishing security metrics, etc. In such a circumstance, it is difficult to manually analyze the design implementation in different levels of abstraction to identify potential vulnerabilities. Moreover, it is costly for a design house to keep many security experts. Therefore, the semiconductor industry and system integrators started to look for a set of metrics, reusable security solutions, and automatic computer-aided design (CAD) tools to aid analysis, identifying, root-causing, and mitigating SoC security problems.

The source of security vulnerabilities in hardware designs is manifold: (i) lack of in-depth security knowledge; (ii) design transformation (in IC supply chain or revisioning); (iii) Ever-increasing threat surfaces; (iv) unintentional aggressive optimization by CAD tools. In such circumstances, all hardware design teams must have automatic CAD solutions to be able to analyze the security of the hardware designs thoroughly, at all levels of abstraction, and against all existing threats (e.g., fault injection, side-channel, and hardware Trojan attacks). CAD tools must evaluate the security of the design in the pre-silicon stage and suggest possible countermeasures while it is possible to modify the design and address the potential vulnerabilities.

In consideration of the above challenges and possible solutions and continuation of the 1st (inauguration) CAD4Sec workshop successfully held last year at DAC'59 with more than 80 attendees, we sketch out the extension of this community-wide event by inviting the experts from the industry, academia, and government to expand the knowledge, to represent the need for, and to share the recent progress on the development of automatic security CAD solutions. Additionally, the 2nd CAD4Sec workshop will extend the size and the involvement of practical demonstrations on the recent CAD for security tools by both industries/academia. There will be a panel discussion consisting of experts in the field to talk about the roadmap for CAD for security development. In continuation to the 1st CAD4Sec workshop, the 2nd CAD4Sec workshop will contain several technical talks on the scope of metrics and CAD as the following:

● CAD for Power/Timing Side Channel Assessment
● CAD for Timing Side Channel Assessment
● CAD for Fault Injection Assessment
● CAD for Electromagnetic Radiation Assessment
● CAD for Security Property Generation
● CAD for Security-oriented Equivalency Checking
● CAD for Malicious Functionality
● CAD for Security Monitoring and Validation
● CAD for Security Verification of Advanced Packaging
● CAD for Secure Heterogeneous Integration Assessment
● CAD for Physical Probing Assessment
● CAD for (Anti-)Reverse Engineering Assessment
Event Type
Workshop
TimeSunday, July 9th8:00am - 5:00pm PDT
Location3008, 3rd Floor
Topics
Security